COOL-LITE® XTREME 70/33 & 70/33 II

Solar control

Thermal insulation

EXTREMELY SELECTIVE SOLAR CONTROL COATING

Read less

EXTREMELY SELECTIVE SOLAR CONTROL COATING

PRODUCT DESCRIPTION
BENEFITS & APPLICATIONS
APPEARANCE
TECHNICAL INFORMATION
PERFORMANCE
TECHNICAL DOCUMENTATION & CERTIFICATION

PRODUCT DESCRIPTION

COOL-LITE® XTREME 70/33 and COOL-LITE® XTREME 70/33 II, respectively the annealed and to-be-tempered version of the product are the most transparent and neutral triple silver coating, bringing ample natural light into buildings while blocking two thirds of solar heat.

Building occupants can thus benefit from generous daylight, while minimizing discomfort from overheating in summer. Architects will appreciate an extremely high level of clarity without distortion of colors of the environment on the façade.

BENEFITS & APPLICATIONS

High level of transparency, maximizing daylight
Neutral aesthetic in transmission and both in internal and external reflection
Low solar factor for reduced cooling loads
Low Ug-value for heating energy savings
Similar performances of both annealed and to-be-tempered versions, as well as the aesthetic, allowing a good compatibility in outdoor appearance

COOL-LITE® XTREME 70/33 & 70/33 II products feature extremely transparent and selective solar control coating for use in high-end commercial buildings, when maximum daylight income and optimum indoor thermal comfort are desired. More natural daylight indoors translates into improving the mood, health and productivity of the people who live or work there. It’s especially suitable for
•   Offices: it can significantly reduce solar heat gain in offices featuring large glazed facades
•   Healthcare: It maximizes incoming daylight for optimum health and well-being.
•   Education: It increases indoor comfort for e¬ffective learning environments.
•   Other: It creates welcoming spaces ideal to admire artwork or enhance shopping experience.

COOL-LITE^® XTREME 70/33 (II) is also available on ORAÉ^® low-carbon glass, to combine performance and sustainability and provide the best of both embodied and operational carbon levels.

This product is covered by a verified Environmental Product Declaration (EPD) and is Cradle to Cradle Certified^® V4.0 Bronze.

APPEARANCE

Extreme colour neutrality and transparency are “in”; compromises are “out”! With COOL-LITE^® XTREME 70/33 and XTREME 70/33 II, your project benefits from the latest innovation in high performance solar control coatings. They offer extreme colour neutrality whatever the viewing angles, low reflection level and highest level of transparency with outstanding performances.

TECHNICAL INFORMATION

RANGE

SUBSTRATE: PLANICLEAR^® (clear glass)
DIAMANT^® (extra clear glass)
ORAÉ^® (low-carbon glass)

THICKNESS: From 4 mm to 10 mm
To-be-tempered version up to 12 mm

SIZE: Standard size (Jumbo 3.21 x 6.00 m)
Standard stock size
Overlength (up to 18m, for to-be-tempered version)

PROCESSING

ANNEALED: The product is available in Annealed version.
HEAT-TREATMENT: The product is available in To-be-tempered version (with suffix II); It is delivered in standard with EASYPRO^® temporary surface protection. To achieve its performance and aesthetics, the product must be tempered. It is compatible with Heat Soak Test.
EDGE DELETION: Edge deletion of the coating is compulsory prior to assembling.
INSULATED GLAZING UNIT: The product must be assembled into an insulated glazing unit (IGU); The coating must be positioned on the face 2 (inside the IGU).
LAMINATION: The product can be laminated, taking care to place the coating outside of the laminate (coating on face 4 of the laminated pane).
BENDING: The to-be-tempered version of the product (II) can be bent. Bending results depend on the process/technology used; trials should be done for validation.
ENAMELING: No common approval for the enameling of silver-based high-performance coatings.