COOL-LITE® ST 150

Solar control

DURABLE SOLAR CONTROL GLASS WITH FULL FLEXIBILITY FOR PROCESSINGFULL FLEXIBILITY AND DURABILITY

Read less

DURABLE SOLAR CONTROL GLASS WITH FULL FLEXIBILITY FOR PROCESSINGFULL FLEXIBILITY AND DURABILITY

PRODUCT DESCRIPTION
BENEFITS & APPLICATIONS
APPEARANCE
TECHNICAL INFORMATION
PERFORMANCE
TECHNICAL DOCUMENTATION & CERTIFICATION

PRODUCT DESCRIPTION

As part of the COOL-LITE® ST family, COOL-LITE® ST 150 is characterized by its relatively high transmission, its good durability and ease of transformation, for a full flexibility in application. Its slightly reflective and neutral aesthetic seduces for a multitude of designs.

BENEFITS & APPLICATIONS

Flexibility and durability: great freedom of use, thanks to their durability and ease of processing. The products from the COOL-LITE^® ST family are real all-rounders. Their numerous processing options open up a wide range of possibilities for architectural and technical planning.
One version for two applications: annealed or tempered.
Added solar protection: As monolithic glass or combined with other coatings from Saint-Gobain Glass products range, COOL-LITE^® ST 150 can divide by two the solar heat entering into the building.

The durability and ease of transformation of COOL-LITE^® ST150 make it ideal for:

Single-glazed laminated shutters (with the layer against the PVB film).
Skylights and roofs
Spandrels
Windows in buildings where occupants want to preserve their privacy during the day, thanks to its slightly reflective appearance.

This product is covered by a verified Environmental Product Declaration (EPD) and is Cradle to Cradle Certified® V4.0 Bronze.

APPEARANCE

TECHNICAL INFORMATION

RANGE

SUBSTRATE: PLANICLEAR^® (clear glass)
PLANILUX^® (clear glass)
DIAMANT^® (extra clear glass)
ORAÉ® (low-carbon glass)
PARSOL® (body-tinted glass) – local offer

THICKNESS: From 4mm to 10mm

SIZE: Standard size (Jumbo 3.21 x 6.00 m)
Standard stock size

PROCESSING

ANNEALED: The product can be used annealed.
HEAT-TREATMENT: The product is a one stock product; it can be heat-treated. It is compatible with Heat Soak Test.
EDGE DELETION: No edge deletion of the coating needed.
ASSEMBLY: The product can be used as monolithic glass; it can be assembled into an insulated glazing unit (IGU); The coating must be positioned on the face # 2, it cannot be used on surface #1 (Class B coating according EN1096)
LAMINATION: The product can be laminated, taking care to place the coating outside of the laminate (coating on face #4 of the laminated pane). Consult us for the list of coating validated in contact with the interlayer.
BENDING: The product can be bent. Bending results depend on the process/technology used; trials should be done for validation.
ENAMELING: can be screen-printed or enameled (restrictions to be respected, contact us for detailed processing guidelines).